UltraSlimline Remote Control for Floor Fan
To use your remote, point the top end directly at the front of the fan aiming at the little window just below the control panel on the top of the fan.
Functions:
Power Button -Turns fan ON & OFF
Speed Mode - Changes wind speed from Low (LO) to Medium (MED) to High (HI).
Wind Mode - Changes the wind mode
from Normal wind to Natural wind to
Sleeping wind.
(1)Normal Wind is indicated by no icon appearing in the upper left hand corner of the display.
(2) Natural Wind is indicated by a
blinking triangle icon appearing in the blinking upper left hand corner of the display.
(3)Sleeping Wind is indicated by a solid
solid | triangle icon appearing in the upper left | |
hand corner of the remote. | ||
|
Timer - Changes the time, the fan is on from 0.5 hr up to a max of 7.5 hr, in 0.5 hr increments.
Oscillation - Turns the fan oscillation ON or OFF
*The remote control operates on 2 AAA batteries (included).*DO NOT MIX OLD AND NEW BATTERIES*DO NOT MIX ALKALINE, STANDARD
1) To clean your fan, first turn it OFF & unplug it.
2)Use a soft cloth to wipe the housing. DO NOT use water, gasoline, polish, or any chemical solution. Do NOT soak/immerse fan in water/liquid.
3)You can use a vacuum cleaner (narrow tube with the brush attachment) to clean all intake and exhaust vents. This will remove dirt and lint that may accumulate over time. DO NOT ATTEMPT TO TAKE APART FAN.
74) Store in a dry place away from excessive heat and direct sunlight.
Important Safety Instructions
READ & SAVE THESE INSTRUCTIONSWhen using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury.
1.Use this fan only as directed in this manual.
2.This fan is intended for personal use INDOORS. It is NOT designed for commercial, industrial or outdoor use.
3.Do NOT place fan in or near a window, to avoid contact with the outdoor elements and to avoid exposure to direct sunlight. Rain may create an electrical hazard. Do NOT immerse fan, plug or cord in water/liquid.
Do NOT spray with water/liquid. DO NOT use Fan outdoors.
4.Operate fan on a dry, level surface.
5.This appliance has a polarized plug (one blade is wider than the other). This plug is designed to reduce the risk of shock by only fitting into a polarized outlet one way. If the plug does not fully fit in an outlet, try reversing the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
6.A loose plug/outlet connection may cause overheating and distortion
of the plug. Contact a qualified electrician to replace a loose or worn outlet.
7.Always turn the fan off and unplug it when transporting it to another location and before cleaning.
8.When disconnecting fan, turn it off, grip the plug firmly and pull it from the wall outlet. Never pull it out by the cord.
9.Do NOT operate the fan if the cord or plug is damaged, the unit is malfunctioning, has been dropped or is damaged in any way.
10.Do NOT operate your fan in the presence of flammable and/or explosive fumes.
11.Do NOT place the fan or any of its parts near an open flame, cooking appliance or heater.
12.Do NOT operate the fan if housing has been removed or damaged.
13.Avoid contact with fan’s moving parts.
14.Close supervision is necessary when operating fan near children.
15.Do NOT mount fan on a wall or hang it from the ceiling.
16.Use of attachments of any kind is NOT recommended.
17.WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICES.
Should you have any questions, comments or suggestions please contact us at:
Seville Classics Inc. Tel:
8
