TO ORDER REPLACEMENT DUST CUP FILTERS OR REPLACEMENT BATTERY PACKSfor Model EP730

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
HAND VACUUM WILL
NOT OPERATE
1. Batteries discharged.
2. No power in electrical
outlet supplying
transformer.
3. Unit needs servicing.
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset
breaker.
3. Call 514-842-8691
HAND VACUUM WILL
NOT PICK-UP OR
SUCTION POWER IS
WEAK
1. Dust cup container is full.
2. Dust cup filter needs
cleaning.
3. Unit needs recharging.
1. Empty dust cup container
– (see page 3).
2. Remove dust cup filter
and check for object(s) in
air duct and remove.
Clean or replace dust cup
filter. (see page 3).
3. Charge unit.
DUST ESCAPING
FROM HAND
VACUUM
1. Dust cup container is full.
2. Dust cup filter is not
installed correctly.
3. Puncture/hole in dust cup
filter.
1. Empty dust cup container.
2. Review dust cup filter
installation instructions.
(see page 3)
3. Replace dust cup filter.
(see page 3)
To order, send check, money order or credit card authorization to:
USA: EURO-PRO Corporation Canada: EURO-PRO Corporation
178 West Service Rd. 4400 Bois Franc
Champlain, NY 12919 St. Laurent, QC H4S 1A7
For Customer Service or information, call:
In U.S.: 800-798-7398 In Canada: 800-361-4639
514-842-8691
Monday to Friday 8:30 A.M. -5:00 P.M. Eastern Standard Time

Visit our website at: www.sharkvac.com

Please Note:

The Dust Cup Filter is washable. It should, however, be
replaced every three months to ensure peak performance
of your vacuum.

Important:

Make sure that Dust Cup Filter is completely dry before re-
installing back in the hand vacuum.
Printed in China
56