INSTRUCCIONES PARA OPERAR (cont.)Instalación de una Toalla en la Escobilla para Pisos
Para absorber la suciedad y proteger las
superficies delicadas, se puede instalar
una toalla blanca de felpa 100% de
algodón en la escobilla.
Importante:T enga en cuenta que las
cerdas de la escobilla pueden perforar las
toallas delgadas. Para cortar y hacer sus
propias toallas, recomendamos que use
una (1) toalla de 20 cm x 43cm (8” x 17”)
doblada en dos o dos (2) toallas de10 cm
x 43 cm (4” x 17”) superpuestas. Esto
asegurará que las cerdas de la escobilla
no sobresalgan de la toalla y que sea lo
suficientemente absorbente para retener
la mayor cantidad posible de suciedad.
Muy Importante:Al instalar las toallas
en la escobilla para pisos, asegúrese que
las toallas no tapen el frente ni la parte
posterior de la escobilla (Ver Fig. 9 )
4. Doble el otro lado de la toalla como
se muestra en la Fig. 7.
Fig. 7
Fig. 6
3. Doble la toalla como se muestra en
la Fig. 6
5. Introduzca la punta del doblez del
paño debajo del sujetador como
se muestra en la Fig. 8.
Fig. 8
6. Coloque la toalla alrededor de la
escobilla y repita el doblez de la
toalla como se muestra en la Fig. 9.
Al doblar la toalla déjela algo suelta.
NO ajustarla alrededor de la
escobilla.
43cm (17”)
Fig. 5
20cm
(8”)
AbiertoAbierto
Fig. 9
OPERATING INSTRUCTIONS cont.Attaching a Towel to the Floor Brush
4. Fold the other side of the towel as
shown in Fig. 7.
Fig. 7
5. Place the corner under the cloth
holder as shown in Fig. 8.
Fig. 8
6. Place the towel around the brush,
and repeat folding the towel as shown
in Fig. 9. When folding the towel,
leave some slack. Do notpull tightly
around the brush, leave some
looseness.
Fig. 9
Important: Please note that bristles may
break through thin towels. To cut and make
your own towels, we recommend that you
use one (1) towel 8” x 17” folded in half or
two (2) towels 4” x 17” laid one on top of
the other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.
Very Important:When installing the
towels to the floor brush, ensure that the
towels do not cover the front and the back
of the brush. (See Fig. 9)
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
Fig. 5
1.Prepare white terry cloth towel:
size 8” x 17” folded in half or place one
on top of another to have two layers.
(Fig. 5) 1. Prepare una toalla de felpa de: 20 x
43 cms. (8”x17”). doblada en dos o
dos (2) toallas de10 cm x 43 cm (4”
x 17”) superpuestas. Fig. 5.
2. Colocar la escobilla sobre la toalla.
Fig. 6
3. Fold the towel as shown in Fig. 6.
2. Place the brush on top of the towel.
20
7