Steam Mode: Assembly
Always unplug the vacuum from the electrical outlet before changing cleaning nozzles.
Fig. 24
The Vac-OR-Steam™, is a complete
Do not use chemicals or detergents in your
Fig. 25
Fig. 27 | Fig. 28 |
Fig. 26
CHANGING TO STEAM MODE
1To release the vacuum nozzle and change to the steam nozzle, press the top “nozzle release” button. (Fig. 24) Lift the main body up and the vacuum nozzle will be released. You may need to apply gentle pressure to the nozzle head with your foot to separate the two parts.
ASSEMBLY STEAM MODE
1Place the main unit on top of the steam nozzle and press down to make sure that the steam nozzle is firmly secure to the main body.
(Fig. 25) You will hear an audible click when the two parts are attached correctly.
IMPORTANT: Steam nozzle head and multi- purpose steam pad must be attached to the cleaning unit in order to use the steam function.
2Place the
IMPORTANT: Make sure the steam nozzle head is well secured to the main body by lifting up on the unit before use.
FILLING THE WATER TANK
1Before use, make sure to fill the water tank. To fill the water into the steam nozzle head, turn the water fill cap counterclockwise to open.
(Fig. 27)
2Use the filling flask and pour water into the tank. (Fig. 28) Do not overfill. Replace the cap on the water tank by turning cap clockwise and tightening.
QUICK TIP: The steam nozzle head can be filled with water before or after it is attached to the main body of the unit.
NOTE: If you live in a hard water area, we recommend using distilled water in your Vac-
AVOIDING DECALCIFICATION YOUR STEAM MOP
Calcium and mineral deposits can build up and impact the performance of your
8 | TOLL FREE: |
MV3010_40_ENG_IB_120703_1.indd 8