Shark S3250W 11 manual Quick Start, Assemble, Fill, Steam Cleaning, Backsaver

Quick Start

Quick Start

fig. 5

fig. 1

fig. 3

fig. 2

fig. 4

ASSEMBLE

1Fit the extension tubes together as shown in the illustration. (fig. 1)

2Place the micro-fiber cleaning pad underneath the mop head, with quick fastener strips facing up. Simply press the mop to the pad to attach it. (fig. 2)

FILL

3Remove the cap to fill the water tank. Use the filling flask and funnel to fill the tank with water to the “MAX” fILL line. Replace the water tank cap. (fig. 3)

STEAM CLEANING

4Plug in the mop. Wait 30 seconds for the unit to heat up and the steam to be ready.

Push the handle toward the mop head in a pumping motion. Customize steam output by slow or fast mopping with a forward and backward motion. (fig. 4)

BACKSAVER

5Use the Shark® Light & Easy™ with backsaver benefit to access tight areas. Press the release button on the handle to lock the Light & Easy™ Steam Mop in the backsaver position. Press the release button on the handle again to straighten the handle. (fig. 5)

TOLL FREE: 1-800-798-7398

S3250W_11_IB_ENG_100505.indd 4-5

www.sharkclean.com

10-05-05 4:14 PM