Getting Started
English
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you
buy them, so you get a quality Shark® Light & Easy™ Steam Mop.
c
b
a
d
e
f
aUpper Handle Tube with Backsaver benefit
bLower Handle Tube c Steam Mop Base
d 2
f Funnel
fig. 1
ASSEMBLY
1Remove all the parts from the package. Verify all the listed parts are included.
2Slide the Upper Handle Tube (the tube with the handle) into the Lower Handle Tube (the short tube). Push the two extension tubes together until you hear them click into place. (fig. 1)
fig. 2
3Insert the assembled handle piece into the steam mop base. Push the tube base together until you hear a click. (fig. 2)
IMPORTANT: Never use the Light & Easy™ Steam Mop without attaching a
2 | TOLL FREE: |
S3250W_11_IB_ENG_100505.indd
www.sharkclean.com | 3 |