
English
fig. 3
fig. 2
3Insert the assembled handle piece into the steam mop base. Push the tube base together until you hear a click. (fig. 2)
4For your comfort, you can adjust the height of the mop. Just lift the latch on the tube 90 degrees to the open position. Holding the handle, extend the tube to the desired height and then close the latch to the locked position. (fig. 3)
QUICK TIP: For easier pushing and pulling, extend the handle length.
S3251_11_ENG_IB_101117.indd 3
IMPORTANT: Never use the Light & Easy™ Steam Mop without attaching
a
IMPORTANT: Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We recommend that you check the use and care instructions from the floor manufacturer.
www.sharkclean.com | 3 |