Shark S3401 Getting Started, Attaching the MICRO-FIBER PAD, Attaching the MICRO-FIBER Bonnet

Getting Started

English

When assembling your Shark® Handheld Steam Scrubber there may be a little water in or around the water tank. This is because we test all our steam cleaners 100% before you buy them, so you get a quality hand steamer.

a

bc

Use the pad for quick clean up and use the shaggy bonnet for scrubbing heavier messes.

aHand Steamer

b1 Micro-Fiber Cleaning Pad

c1 Micro-Fiber Cleaning Bonnet

fig. 1

ATTACHING THE MICRO-FIBER PAD

1Place the micro-fiber cleaning pad on a flat surface with the quick fastener strips facing up. Place the hand steamer on the top of the pad to attach (fig. 1).

IMPORTANT: Never use the hand steamer without attaching a micro- fiber cleaning pad or bonnet to avoid damage to your hard surfaces.

fig. 2

ATTACHING THE MICRO-FIBER BONNET

1Align bonnet and hand steamer so that the purple tag is at the rear of the hand steamer. Insert front of the hand steamer into the bonnet and use the purple tag to gently pull bonnet over the base of the hand steamer (fig. 2).

Replacement micro-fiber pads and bonnets are available at www.sharkclean.com or by calling 1-800-798-7398.

fig. 3

FILLING THE WATER TANK

1Open the water tank cap by lifting the cap up to the open position (fig. 3).

2A filling flask is included with your Vac-Then-Steam™ and hand steamer to make filling the water tank easy. Fill the flask with water and use the funnel to pour it into the tank.

Keep the water level under the MAX FILL line.

3Close the water tank cap by pressing the cap down to the closed position.

2 TOLL FREE: 1-800-798-7398

www.sharkclean.com 3