6TOLL FREE : 1-80 0-798-7398
Using Your Steam Pocket® Mop IMPORTANT: Do not use the mop
without first attaching a micro -fiber
pocket and adding water to the tank
first. When you are using the mop
for the first time, it might take longe r
than the normal 30 seconds to star t
steaming. Just pump the han dle a
few times in a downward motion to
prime the pump and it should be
ready.
2 Pump the handl e a few times in a
downward motion. This pumping
action will release steam as you
mop and allows you to customize
the amount of steam you want.
Begin mopping with a forward
and backward motion. The natu ral
motion of mopping will produce
steam.
NOTE: Make sure the floors are
swept or vacuumed before using the
steam mop.
1 Pull and twist the quick release co rd
holder to unwrap the power cord
completely.
Plug into a 120-volt electrical ou tlet
The power “On” light will turn blue. I t
takes approximately 30 seconds for
the mop to heat up and for the steam
to be ready.
2
1