ASSEMBLE
1 Insert the mop handle into th e
pump actuator (the tube that lea ds
to the tank). Push the mop handle
and pump actuator together un til
you hear them click into place.
2 Select a mop head. Choose the
All-Purpose, Versa-Tile™ or Large
Area mop head. Fit one side of
the pocket onto the head first,
then using the lavender loop, pull
the Steam Pocket® over the head.
Attach the quick fasteners on the
top of the pocket to secure in place.
3 Snap the mop head into the base to
secure it. Press the release but ton
to exchange mop heads.
FILL
4 Lay the mop on the floor or on
a counter top and remove the
water tank cap by turning counter
clockwise. Fill the water tank u sing
the filling flask. Do not overfil l the
water tank. Replace the water ca p
and tighten.
IMPORTANT: Make sure your floors
are sealed. Before using the S team
Pocket® Mop consult page 3 for
more information.
Quick Start
3
4
When assembling your steam m op
there may be a little water in or around
the water tank. This is becaus e we test
all our steam mops 100% befo re you
buy them, so you get a quality
Shark® Steam Pocket® Mop.
1
2
TOLL FREE : 1-80 0-798-7398