Shark SE200 manual Care of Your Steam Mop, After USE and Storage

Care of Your Steam Mop

fig. 1

fig. 3

fig. 2

AFTER USE AND STORAGE

1When you have finished using the Steam Mop, press the STEAM button to stop the unit from steaming. The LED light will blink BLUE. Unplug the cord from the outlet and place the mop into the upright position. (fig. 1) Let the unit cool for 2-3 minutes.

2Carefully pull the micro-fiber cleaning pad from steam mop. (fig. 2) Wash the pad if necessary (for washing instructions see page 8).

3Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap.

4To store the cooled Shark® Steam Mop, hang on a large hook. (fig. 3)

NOTE: If you want to store the Steam Mop standing upright, make sure it is leaning against a wall for added support and safety. Always store your Shark® Steam Mop with the micro- fiber cleaning pad removed. Store away from children and high traffic areas.

www.sharkclean.com

7