SHARK SSG • 8.914-337.0 / 97-6134 • Rev. 8/07
OPERATOR’S MANUAL PRESSURE WASHER
6
COMPONENT IDENTIfICATION SMALL
Pump — Delivers a specific gpm to the high pressure
nozzle which develops pressure.
Starter Grip— Used for starting the engine manually
(except 20 HP Honda).
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Unloader valve— Safety device which allows pres-
sure to be released when spray gun is closed.
Wand — Must be connected to the spray gun.
high Pressure hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
Adjustable Thermostat — Safety control which
prevents temperatures from going above adjustable
setting.
Note: If trigger on spray gun is released for more than
2 minutes, water will leak from valve. Warm water will
discharge from pump protector onto floor. This system
prevents internal pump damage.
Note: if flue adapter is installed, the burner assembly
air adjustment must be adjusted.