Insert into
Lower
Handle
Fig. 2a
Fig. 2b
Fig. 2
2. Attach the telescopic tube to the extension tube by pushing the plastic insert into
the bottom part of the telescopic pole. (Fig. 2a) Push in until the “tab” on the
plastic insert snaps into the open slot on the telescopic tube. Push the
telescopic tube into the upper handle. (Fig. 2) Insert the extension tube into the
lower handle so that the “tab” on the plastic insert snaps into the open
slot on the lower handle. (Fig. 2b)
ASSEMBLING YOUR CORDLESS SWEEPER
Your cordless sweeper will require very little assembly. You should remove it from
the carton and familiarize yourself with all the components listed per the exploded
view drawing. (Pg. 2) This will help you in the assembly and operation of your
cordless sweeper.
NOTE: The charging adapter and lower handle may be shipped inside the dust cup
or the packaging.
3
OPERATING INSTRUCTIONS
1. Insert the lower handle - small end - into the sweeper power head. Push until
firmly in place. (Fig. 1)
Lower
Handle
Fig. 1
NOTE:The lower handle extension tube has a different plastic insert. This
tube should be the first on the assembly.
3. Place the handle into the upward storage position.
10
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
To improve the performance and life of your unit, we recommend you do the
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the dust
container fits into. Remove any hair, fiber or other materials that may have built up
in the chamber, and on the rotating brush.
2. Don’t use abrasive materials to clean the sweeper.
Do not immerse the unit in water.
3. Do notpick up liqui ds or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces.
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
Fig. 17
8. Slip the belt over the brush bar cap.
9. Insert the brush bar into the slot. (Fig. 15)
10. Insert the gear box tabs into the tab slots and push down until it clicks into place.
11. To replace the squeegee, follow instructions above for removing the gear box and
slide the squeegee out from left to right. (Fig. 17)