SharkRack Enclosure Installation Guide
Installing a MultiBay Kit
Step | Detail |
MultiBay kits are used to group two or more SharkRack cabinets together. MultiBay kits can be installed prior to installing computer equipment into the rack cabinet or after equipment is already loaded.
(Optional) Remove the two side panels facing each other from the two cabinets being bayed together. See “How to Remove or Install Side Panels” on page 26.
1.Move the two cabinets together.
2.As necessary, adjust the leveling feet until the cabinets are level and square to each other.
3.Secure the (4) MultiBay plates to the cabinets using (4) M6 screws in each plate
Figure 38
MultiBay Kit
REV D, ECO2773 | Page 33 of 46 |