SharkRack Enclosure Installation Guide

Installing a Typical 19 inch EIA Power Strip (cont.)

Step

Detail

3. Secure to the SharkTRAC™ using screws

3a. Install 10-32 cage nuts. The SharkTRAC™ requires the use of cage nuts; install them into the appropriate holes using the method shown.

Figure 34

Cage Nut instillation

3b. (As required) Adjust the mounting brackets orientation.

Remove the hardware from the brackets as required. Rotate the mounting brackets as required. Reinstall the hardware.

Figure 35

Mounting Bracket

3c. Secure the strip using (6) 10-32 x 1/2 inch panhead screws.

3d. Connect necessary cables.

Figure 36

PDU installation

ID-00210-000

REV D, ECO2773

Page 31 of 46