V210/V240-R19-H Rack Mount Kit Installation Guide
Step | Detail |
1. Separate the Slide Assemblies by detaching the Inner Slide Member from the Outer Slide Member. Remove the Inner Slide Member from the Slide Assembly by first fully extending the Inner Slide Member. Next depress the slide stop, which allows for the Inner Slide Member to be detached.
2. Attach the Inner Slide members to both sides of the server using (5) M4 pan head screws.
3.Adjust the Slide Mounting Brackets to the correct Depth. To adjust:
∙Loosen the two nuts at the rear of the slide
using a 11/32” wrench
∙ Move the Rear
∙ Tighten the nuts.
4/11/05 Rev 2.0 | Page 2 of 4 |
