SharkRack manual V210/V240-R19-HRack Mount Kit Installation Guide, Step, Detail

V210/V240-R19-H Rack Mount Kit Installation Guide

Step Detail

4. Install the Outer Slide Member in the rack enclosure. Attach the Front Mounting Bracket to the Front Rack Rail using (2) 10-32 x 1/2” pan head screws. Attach the Rear Mounting Bracket to the Rear Rack Rail using (3) 10-32 x 1/2” pan head screws.

5. Repeat step 3 for the left Outer Slide Member.

6.Install the server into the rack enclosure. Approach the rack with the rear of the server facing the rack enclosure. Align the Inner Slides on the server with the Outer Slide Rails attached to the rack enclosure. Slide the server all the way into the rack enclosure until it stops. The slides will lock into place in the slide rails.

7. Secure the server in the rack by tightening the (2) thumbscrews mounted on either side of the server’s front bezel.

SHP900006-000 4/11/05 Rev 2.0 Page 3 of 4