10
EZ SETUP during First Power On
LWhen you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
(3) Plug in the AC POWER cord to the wall outlet.
1Press the

POWER

button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2Press

CH UP

(
8
) or

DOWN

(
9
) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3Press
VOL (+)
or
(–)
to access the EZ SETUP mode.
4Press

VOL (+)

.
The tuner will automatically search for the broadcasting
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the EZ SETUP process once it has
started, press
VOL (–)
and it will be canceled.
If you want to SETUP again, please refer to page 26 on
SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
5Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 - 29
for more information on manually memorizing the channels using CHANNEL MEMORY.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak
or multiple stations are received on the same channel. Please refer to pages 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
NOTE:
POWER
CHANNEL
UP(8)/
DOWN(9)
MENU
VOLUME
(+)/(–)
(EZ SETUP mode)
(Remote Control)
(On the Set)
(SELECT LANGUAGE mode)
10-18 25&27NS100/180 1.4 6/1/00, 2:07 PM10