Manuals / Brands / TV and Video / CRT Television / Sharp / TV and Video / CRT Television

Sharp 27SC260 Using the Audio Output Terminals, Note:, (AUDIO OUTPUT terminals are located on the rear of the cabinet.)

1 54

Download 54 pages, 2.53 Mb

Using the Audio Output Terminals

•These terminals are used for connecting an external audio ampliﬁer.The STEREO/MONO/SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on theTV itself.These terminals relay the audio signal of all programs being displayed on the TV screen.

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

CONNECTIONS

��

��

��

��

(1)Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level.

(2)Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV.

(3)Turn the TV set and stereo ampliﬁer on.

(4)If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO SELECT screen. See pages 15, 16.

(5)Adjust the volume control on the stereo ampliﬁer to a moderate listening level.

(6)Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME, MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

•For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used.

•When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adaptor as shown below.

•When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal sound quality. (see page 15.)

		Plug adapter
To the TV		To the equipment
To the TV		being connected
		being connected
Pin plug x 2	Pin Plug	Pin jack/Mini plug

42

Dimension: 140 X 215 mm

Contents

H OPERATION MANUAL H IMPORTANT INFORMATION WARNING: IMPORTANT INFORMATION (Continued) IMPORTANT SAFEGUARDS CAUTION: IMPORTANT SAFEGUARDS (Continued) Trademarks Supplied Accessories Before Operating Your Television Location Power Antenna Connections Antennas OUTDOOR ANTENNA CONNECTION A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna NOTICE Quick Reference Control Operation •Part Names Front Panel Basic Remote Control Functions EZ SETUP during First Use Please perform the following instructions before pressing the POWER button POWER To cancel EZ SETUP EZ SETUP during First Use (Continued) Antenna Setup - DIGITAL HSIGNAL STRENGTH Antenna Setup - DIGITAL (Continued) HCHANNEL STRENGTH REMOTE KEYPAD Accessing the MAIN MENU screen without Remote Control Channel Call Changing Viewing Channel in the USA will have a mixture of analog and digital channels in their lineups H You can change channels in several ways Method Language Sleep Timer Video Adjust Selected item VOL k button VOL l button Audio Select HMTS (Multichannel TV Sound) (For Analog Channel only) This function allows reception of stereo or bilingual TV sound You can enjoy •If stereo sound is difﬁcult to hear; Audio Select (Continued) HAUDIO ADJUST Digital Audio HAUDIO SERVICE HAUDIO PREFERENCE Closed Caption •How to set CLOSED CAPTION HDuring viewing analog channel MODE: DATA: CH Closed Caption (Continued) HDuring viewing digital channel HCLOSED CAPTION SERVICE HCLOSED CAPTION PREFERENCE FONT SIZE Parent Control (V-CHIPOperation) HV-CHIP [1] MPAA RATING •MPAA RATING Example 1: Parent Control (V-CHIPOperation) (Continued) •TV PARENTAL GUIDELINES (Example) Example 1.1 : Age Based setting Example 1.2 : Age Based setting Example 2.1 : Content Based setting [3] Canadian Rating Systems [i] Canadian English ratings Rating Description [ii] Canadian French ratings •How to set V-CHIP[1] MPAA RATING To change the BLOCK after registering a secret No [2] TV GUIDELINES •How to set Canadian Rating System Setting for Canadian English ratings and Canadian French ratings 1Repeat steps 1 to 4 of [1] MPAA RATING •Activating the V-CHIPBLOCK •To temporarily cancel the V-CHIPBLOCK REMOTE KEYPAD •To change the V-CHIPBLOCK after registering a secret No To temporarily cancel the BLOCK Parent Control (VIEW TIMER) HVIEW TIMER zero.) • How to set VIEW TIMER Parent Control (VIEW TIMER) (Continued) Example: To change the VIEW TIMER setting after registering a secret No How to set VIEWTIMER •To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set.) How to set VIEW TIMER VOL � and CH •Notice of Remaining VIEWING TIME Energy Save HSCREEN The reduction in brightness will be less noticeable under low room lighting conditions HSTANDBY Set Up HEZ Setup To cancel EZ SETUP Press VOL l Set Up (Continued) HChannel Setting HANALOG CH SEARCH Saving ANALOG broadcast TV channels into memory To start: To stop: HDIGITAL CH SEARCH HCH MEMORY Adding weak or additional channels or erasing unwanted channels from TV memory VOL k VOL l HBLUE SCREEN Auto Input Screen Format •The format of the picture can be adjusted to either of the two screen formats Page VIDEO EQUIPMENT Using the Video and Audio Input Terminals (Continued) Notes: •To watch video material playback INPUT Using the Audio Output Terminals (AUDIO OUTPUT terminals are located on the rear of the cabinet.) QUICK SERVICE CHECK LIST Warning message for Digital broadcasting HThe warning message about reception of digital broadcast The example of an warning Possible Solution message displayed on a screen INFORMACIÓN IMPORTANTE ADVERTENCIA : PRECAUCIÓN : MEDIDAS DE SEGURIDAD IMPORTANTES(Continuación) • Nombres de los componentes LISTA DE COMPROBACIONES DE SERVICIO RAPIDO (FRANÇAIS) INFORMATIONS IMPORTANTES INFORMATIONS IMPORTANTES (Suite) PRÉCAUTIONS IMPORTANTES ATTENTION : • Nomenclature LISTE DES Limited Warranty