Sharp 36C530 operation manual Operation of Universal Remote Control, Press Remote Keypad

Operation of Universal Remote Control

•Universal Remote Control

With the purchase of your television set you also have received the latest innovation in remote control technology. With its easy-to-use push button keyboard, your Remote can control your television set and most infrared remote controlled VCRs, cable TV converters and DVDs as well.

Note:

•Depending on the model year produced, brand and type of VCR, cable TV converter and DVD, some models may not be compatible with the remote control.

•Some brands may not enable channel selection until the ENTER is pressed. In such case, try the following.

Example:

When you select channel 24,

(1)Press REMOTE KEYPAD “2”.

(2)Press REMOTE KEYPAD “4”.

(3)Press ENTER.

For detailed information on the use of the Cable TV converter Box refer to their operating manuals.

•Using your Remote with your TV

After installing the batteries, set the CATV/ DVD-TV/VCRon the Remote to the TV position. (If you can change the channel of the TV by pressing CH a/s on the Remote Control, it is in the TV position.)

•“Identifying” VCRs, cable TV converters and DVDs

Your Remote Control has been set at the factory to operate your TV and many remote controlled VCRs, cable TV converters and DVDs. However, in some cases an easy one- time set-up step may be necessary before the Remote will operate accessory VCRs, cable TV converters and DVDs.

•In this set-up step, the Remote locates and memorizes the remote control transmitter code for the VCR, cable TV converters and DVDs.

•Once “identified”, the Remote sends proper signals to operate your accessory.

•This identifying step will not have to be repeated until power to the Remote is interrupted due to a battery failure.

•Using your remote control with a VCR Once you make certain the Remote Control has “identified” your remote controlled VCR or DVD, the Remote is ready to operate your unit. The various VCR or DVD function buttons on the Remote will not operate your VCR or DVD if those features are not already found on your unit.

•All VCR buttons will operate whether the Remote is in TV or VCR modes.

•For detailed information on the use of the VCR or DVD, refer to the operation manual of the VCR or DVD.

DVD/VCR POWER

Press to turn the VCR or DVD on and off.

PLAY

Press to playback a tape or disc.

REWIND

Press to rewind a tape or reverse a disc. For some VCRs or DVDs you may need to press STOP first, then REWIND.

PAUSE

Press to temporarily stop the tape or disc during playback or recording (VCR only).

Press again to release PAUSE.

POWER

TV DVD

VCR DISPLAY INPUT

1	2	3
4	5	6
7	8	9
FLASHBACK		ENTER
	0	100

PERSONAL PREFERENCE

A B C D

CH

VOLVOL

—+

CH

MENUMUTE

CATV TV

DVD VCR

REW PLAY FF

PAUSE STOP REC CH/SKIP

REMOTE KEYPAD

Use to enter two-digit code numbers when identifying your VCR, DVD and CATV converter.

ENTER

FF

Press to rapidly advance the tape or disc. For some VCRs or DVDs, you may need to press STOP first, then FF.

VCR CHANNEL

UP ( )/ DOWN ( )

Press to scan up or down through channels on the VCR.

DVD SKIP

Press to jump forward to the beginning of the next chapter/track, or backward to the beginning of the

STOP

Press to stop the tape or disc.

TV • CATV • VCR • DVD

current chapter/track, and automatically start to play that chapter/track.

RECORD

Press to begin recording. (VCR only)

41

32C530(41-45) 41 1/29/03, 2:26 PM

Dimension: 140 X 215 mm