IDENTIFY PARTS OF CLEANER
| 7 | 1 | 3 |
2 |
| ||
|
| ||
|
|
|
3a
ASSEMBLY
8
1Snap interlocking wands together.
4
5
6
1.Cord Rewind Pedal.
2.On/Off Pedal.
3.Bag Indicator (on some models)
3a. Tool Cover Latch
4.Hose Inlet
5.Bag Cover Latch (on top of bag cover)
6.Carrying Handle (on the bottom)
7.Variable Speed Control
8 
9
10
2Push assembled wands into power nozzle.
3Place
4Insert hose coupling into top of canister.
Quick Release Foot Pedal (on some models) Press down on pedal for quick release of wands from powerhead.
4
5Pull electric plug out from back of cleaner push plug into outlet. To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.
3
1
2
6
7
5
8.Exhaust Filter
9.Motor Filter (behind dust bag)
10.Disposable Dust Bag
11
11. Electric Cord
NOTE: When pulling on electric cord watch for a yellow line on the cord. Then continue slowly pulling on cord till you see the red line, stop. The red line indicates the end of usable cord.
HOW TO USE
A carpet should be cleaned regularly over heavily traveled areas, and once a week over the entire carpeted area. Vacuum slowly, making several passes (forward and back- ward) over the carpet, covering small areas at a time. The time required to clean the carpet will depend on several
6Step on handle release on the motorized nozzle to release handle; pull back to comfortable work position.
7Push ON/OFF Pedal
(A thermostat automatically shuts the motor off if it overheats, see Automatic Motor
8Bare floor or carpet cleaning selection on remote control, only. See page 4.
3
