72GF-66E
ELECTRICAL SPECIFICATIONS
•Power Input | |||
•Power Consumption |
|
| |
Normal Operation | 110W | ||
1W | |||
•Audio Power Output Rating (MPO) / Impedance | |||
Internal Left Speaker | 15W (MPO) | ||
Internal Right Speaker | 15W (MPO) | ||
Internal | Centre Speaker | 15W (MPO) | |
Internal Subwoofer | 20W (MPO) | ||
•Speakers |
|
|
|
Left / Right | 7Ω 12W, 6 x 12cm | ||
Centre |
| 7Ω 12W, 6 x 12 cm | |
Subwoofer | 4.5Ω 20W, 11cm Round | ||
•Convergence |
|
|
|
Static (Centre) | between any two colours | ||
Dynamic | ................... | after static equals zero | |
•Focus | ....... High | ||
•Sweep Deflection | Magnetic | ||
•Picture Intermediate frequency
L’ | 33.9MHz |
L, B/G, D/K, I | 38.9MHz |
•Sound Carrier Trap | |
L’ | 40.4MHz |
L, D/K | 32.4MHz |
B/G | 33.4MHz |
I | 32.9MHz |
•Adjacent Sound Carrier Trap | |
L’ | 32.4MHz |
L, D/K, B/G | 40.4MHz |
I | 40.9MHz |
•Adjacent Picture Carrier Trap | |
L’ | 41.9MHz |
L, D/K, I | 30.9MHz |
B/G | 31.9MHz |
•Aerial Input Impedance | |
VHF/UHF | 75 ohm Unbalanced |
•Tuning Ranges .... | 48.25 MHz thru 855.25 MHz |
VHF:
UHF:
•White Level
Set brightness control to get total picture tube cathode current of 600 microampere under no signal condition. Maximum necessary correction of each picture tube cathode current to get 8550 degrees K+1 MPCD screen temperature should not exceed 15% of its original value.
X=0.290 Y=0.300
Specifications are subject to change without prior notice.
EN
In order to comply with the European Norm
On TV set manufactured before the above date (Serial Number 801022 or previous), this modifica- tion is not required.
MODEL DESTINATION & DIFFERENCES.
WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No
3
