Manuals / Brands / Household Appliance / Air Conditioner / Sharp / Household Appliance / Air Conditioner

Sharp AF-08ERL TO CHANGE TEMPERATURE SETTING, TO CHANGE AIR FLOW DIRECTION

1 20

Download 20 pages, 658.09 Kb

12

HOW TO OPERATE

---Lower temp.

Touch the TEMPERATURE setting

pad to adjust the temperature set-

ting.

• Temperature can be set within the range

of 64°F to 86°F.

• Display will change as you touch

the pad.

NOTE:

• In fan only (HIGH FAN, MED FAN, LOW FAN) operation, the temperature display will go off and

the temperature setting cannot be changed.

• In cases of power outages or when the unit is disconnected; when the power is restored or the

unit is plugged in, the unit and display will return to the preset conditions of 74°F and HIGH

COOL. The unit will not automatically turn back on. The user must touch POWER ON/OFF to

resume operation.

During cooling operation

TO CHANGE TEMPERATURE SETTING

---Raise temp.

TO CHANGE AIR FLOW DIRECTION

Horizontal louvers

Adjust UP/DOWN air flow

The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical

louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient cooling

of the room.

Vertical louvers

Adjust LEFT/RIGHT air flow

Lever

Contents

Main AF-08ERL ROOM AIR CONDITIONER CONTENTS FOR YOUR PROTECTION CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 INSTALLATION INSTRUCTIONS CHECK WINDOW AREA LOCATION ACCESSORIES SUGGESTED TOOLS 2 3 INSTALLATION 1 4 WARNING: 7 8 6 9 5 PRECAUTIONS CAUTION FOR USE GROUNDING INSTRUCTIONS PRECAUTIONS NOTES ON OPERATION ENERGY EFFICIENCY TIPS PARTS NAMES UNIT CONTROL PANEL HOW TO OPERATE Touch POWER ON/OFF pad. To turn off the unit, touch POWER ON/OFF pad again COOLING OPERATION TO CHANGE FAN SPEED AND OPERATION MODE During operation Touch SELECTOR pad and select the operation mode and fan speed. TO CHANGE TEMPERATURE SETTING TO CHANGE AIR FLOW DIRECTION ENERGY SAVER OPERATION 2 1 SLEEP OPERATION 2 1 ON TIMER OPERATION 1 delayed start time. When the unit is not operating TO CANCEL THE TIMER SETTING OFF TIMER OPERATION 1 delayed stop time. TO CANCEL THE TIMER SETTING When the unit is operating INSTALLING BATTERIES USING THE REMOTE CONTROL OPERATING WITH THE REMOTE CONTROL TRANSMITTER TEMP. button POWER ON/OFF button SELECTOR button CLEANING AND MAINTENANCE CLEANING THE FILTER 1 CLEANING OF THE FRONT PANEL AND CABINET OILING OF THE COMPRESSOR AND FAN MOTOR IS UNNECESSARY BEFORE CALLING FOR SERVlCE AIR CONDITIONER DOES NOT OPERATE AT ALL AIR CONDITIONER DOES NOT PROPERLY COOL TIMER DOES NOT WORK PROPERLY NOTE: WATER IN BOTTOM OF TRAY