Sharp AF-08ERL 1

HOW TO OPERATE

• This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance.

You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance

of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time.

• The unit will stop automatically according to your setting.

1Touch the TIMER ON/OFF pad to set the

• The time setting will change as you touch the

pad. The display will change as follows;

• The timer will be set, 5 seconds after the

TIMER ON/OFF pad is touched for the last

time.

• TIMER indicator will light.

• The time display will count down the remain-

ing time.

• The unit will stop when the set time expires.

All indicators and displays will go out.

(If you wish to stop the operation

10 hours later, set the delay time

as shown above.)

Touch the TIMER ON/OFF pad again after the

timer is set or, press the TIMER ON/OFF pad until

CL(cancel) appears on the display.

NOTES FOR ON/OFF TIMER SETTING AND OPERATION:

• After setting the TIMER, change the temperature and fan speed settings as shown on pages 11

and 12. When the temperature is set in the timer mode, the temperature will show in the display

for 5 seconds and then return to the time display.

• The last setting used will be memorized and will appear on the display the next time you operate

the unit with the TIMER function.

• If a power failure occurs while the ON or OFF TIMER is set, the TIMER memory will be cancelled

and will not resume even after power is reinstated. The unit will not automatically start.

• OFF TIMER OPERATION can also be set with the REMOTE CONTROL.