ESlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case. Do not pull or lift on the styrofoam discharge area.
ATTACH THE TOP MOUNTING RAIL SEAL STRIP
Remove the backing from the top mounting rail seal strip and attach the seal strip to the bottom of the top mounting rail, along the front edge. Allow the seal strip to overlap 3/8″ on each end.
INSTALL THE
SIDE ACCORDION PANELS
ASlide the left and right accordion panels into the top and bottom mounting rails.
BAttach the accordion panels to the case using 3 Type A screws on each side.
Top mounting rail
3/8″
Remove backing from seal strip
3/8″
FRONT VIEW | Top mounting rail | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PREPARE THE WINDOW
•Cut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.
3/8″ overlap Seal strip 3/8″ overlap
INSTALL THE TOP MOUNTING RAIL ONTO THE CASE
Window 
sash seal
Attach the top mounting rail onto the top
INSIDE
of the case with 3 Type B screws.
