INSTALL THE CASE IN THE WINDOW
AOpen the window and mark the centerline of the window sill.
BCarefully place the case on the window stool and align the center mark on the bottom front with the centerline of the sill.
CPull the window down behind the top mounting rail.
NOTE: Do not shut the window so tightly that movement of the accordion panels is restricted.
DSelect the position that will place the sill supports near the outermost point on the sill. Place the short side of the sill supports, on the case bottom, toward the window. Attach the sill supports to the case track hole in relation to the selected position using 2 Type B screws in each support.
F
G
Secure the case to the window sill by using 3 Type D screws.
Pull the accordion panels to each window sash track. Attach them on each side to the window sash and the window sill using
4 Type C screws.
Screws
Long side of sill supports
OUTSIDE
E
8
Adjust the bolt and the nut in each support so that the case is installed with a slight tilt to the outside. Use a level; about 1/2 bubble will be the correct case slant to the outside.
CAUTION: If the sill support bolts do not contact the window sill, or if you have a window without a sill, you must order accessory kit RAK87 to properly install this air conditioner.
