FAULT CODES | TO TURN UNIT OFF: |
DO THIS:
PRESS POWER
ON/OFF
If the display reads "ES" or "AS", a sensor has failed.
Contact your Authorized SHARP Service Center.
Fresh Air Vent Control
The Fresh Air Vent allows the air conditioner to:
1.Recirculate inside air - Vent Closed (see Fig. 1)
2.Draw fresh air into the room - Vent Open (see Fig. 2)
3.Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (see Fig. 3)
Fig. 1 (OFF) | Fig. 2 (FRESH AIR) | Fig. 3 (VENT) |
The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed.Rotate the Auger Wheel Up or Down until the desired direction is obtained.
AUGER WHEEL