LOADING COPY PAPER
2 | Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the | |
arrow to remove it while pressing down the pressure plate of the paper tray. | ||
|
2
Installation
Store the pressure plate lock which has been removed in step 2 and the screw which
3 has been removed when unpacking (see page 11, step 2 of REMOVING PROTECTIVE PACKING MATERIALS) in the front of the paper tray.To store the pressure plate lock, rotate the lock to fix it on the relevant location.
Pressure plate lock | Screw |
4 | Adjust the paper guides on the paper tray to the copy paper width and length. | ||
Squeeze the lever of paper guide and slide the guide to match with the width of the | |||
| |||
| paper. |
| |
| Move paper guide | to the appropriate slot as marked on the tray. | |
Paper guide BPaper guide A
5 | Fan the copy paper and insert it into the tray. Make sure the edges go under the corner | |
hooks. | ||
|
Do not load paper above the maximum height line ( 
). Exceeding the line will cause a paper misfeed.
14
