Sharp AR-153E, AR-157E operation manual Contents 26 Index

4 Plug and Play Screen does not Appear (when the USB is connected)

If the Plug and Play screen does not appear after you connect the unit to your computer with a USB cable and turn on the power of both devices, follow the steps below to verify that the USB port is available.

1

2

Click the "start" button, click "Control Panel", and then click "Performance and Maintenance".

On Windows 98/Me/2000, click the "Start" button, select "Settings", and then click "Control Panel".

Click "System", click the "Hardware" tab, and click the "Device Manager" button.

"Universal Serial Bus controllers" will appear in the list of devices.

3	Click the ( ) icon beside the "Universal Serial Bus
	controllers".

	Two items will display, your Controller chipset type and
	Root Hub. If these items appear, you can use the USB
	port. If the "Universal Serial Bus controllers" shows a
	yellow exclamation point or does not appear, you must
	check your computer manual for USB troubleshooting
	or contact your computer manufacturer.
4	When you make sure that the USB port is enabled,
	install the software, referring to "INSTALLING THE

SOFTWARE" in the Operation Manual.

!If the "System" icon does not appear on

Windows Me, click "view all Control Panel options" to view it.

Note !On Windows 98/Me, double-click the "System" icon and click the "Device Manager" tab.

!On Windows 2000, double-click the "System" icon, click the "Hardware" tab, and click the "Device Manager" button.

CONTENTS 26 INDEX