Sharp AR-156 appendix Making Copies, Normal Copying

MAKING COPIES

2

Making copies

This chapter describes basic copying functions and some other copying functions using the bypass tray.

NORMAL COPYING

This copier has two document input stations -reversing single pass feeder (RSPF) for automatic document feeding and an original table for manual handling of documents.The RSPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 10" x 14" and weighing from 14 to 23 lbs.

When copying from the RSPF, two-side originals can be copied automatically without having to manually turn them over.

Automatic two-sided copying can also be performed with this copier. When copying from one- sided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge.

					A
		A
A	A		A	A
		A			A
Turn on Long Edge			Turn on Short Edge

●When making two-sided copies from the original table, the copy paper size must be letter. When making two-sided copies from the RSPF, letter, legal, and invoice sizes can be used. Non-standard size paper cannot be used.

● When making two-sided copies from the RSPF, a multiple number of copies cannot be set.

●When making two-sided copies, the bypass tray cannot be used.

●When using two-sided invoice size originals from the RSPF, be sure to place them in the landscape orientation. Otherwise, an original misfeed will occur.

Ensure that paper of the desired size is set in the paper tray. See page 10, LOADING COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the

paper output tray extension. If you use another tray, use the tray select () key to select the desired tray.

12