Problems Printing
Cannot configure for USB connection.
Possible Cause | Remedy |
USB cable does not | Use USB cable to specification Ver.1.1. |
meet specifications. |
|
|
|
Interface is disabled. | Check that USB interface is set to Enable. |
Configuration | Configure again from the beginning. |
procedure was not |
|
correctly followed or |
|
cancelled. |
|
|
|
USB cable is | Reconnect or try another cable. |
disconnected or |
|
faulty. |
|
|
|
A USB hub is being used.
The printer cannot be used with a USB hub. Connect the printer and computer directly.
Cannot print.
•PRNUSBX WRITE ERROR is displayed.
Possible Cause | Remedy |
Printer is switched OFF. | Switch ON. |
|
|
Printer interface cable is | Reconnect the printer interface cable. |
disconnected. |
|
|
|
A converter, buffer, extension cable or USB hub is being used.
Test by connecting the printer and computer directly.
Printer driver output port | Set correct output port to which the printer interface |
is incorrect. | cable is connected. |
Printer is not selected in | Select the printer or set to default printer. |
the printer driver. |
|
|
|
Incorrect printer driver is | Delete this printer driver and install correct printer driver. |
being used. |
|
|
|
Sharp