Item
USB
SOFT RESET
OFFLINE
RECEIVE
USB Menu
The default settings are bold.
Value | Description |
ENABLE; DISABLE | Selects USB interface. |
ENABLE; DISABLE | Enables/Disables soft reset |
| command. |
ENABLE; DISABLE | Enable = maintains reception without |
| changing the interface signal, even if |
| an alarm occurs. The interface stays |
| open even if the ON LINE button is |
| pressed. The interface issues a |
| BUSY signal only when the receive |
| buffer is full. |
Item
TCP/IP
NETWARE
ETHERTALK
NETBEUI
FRAME TYPE
DHCP/BOOTP
RARP
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
SETTINGS
INITIALIZE
Network Menu
The default settings are bold.
Value | Description |
ENABLE; DISABLE | Selects TCP/IP protocol. |
ENABLE; DISABLE | Selects Netware protocol. |
ENABLE; DISABLE | Selects EtherTalk protocol. |
ENABLE; DISABLE | Selects NetBEUI protocol. |
AUTO; 802.2; 802.3 | Selects Ethernet frame type. |
| |
ENABLE; DISABLE | Selects whether selection of DHCP/ |
| BOOTP is automatic. |
ENABLE; DISABLE | Selects whether selection of RARP is |
| automatic. |
xxx.xxx.xxx.xxx | Configures IP address. |
xxx.xxx.xxx.xxx | Configures subnet mask. |
xxx.xxx.xxx.xxx | Configures gateway address. |
ON; OFF | Selects printing of network menu |
| map. |
| ON = When printer exits the menu |
| mode it will print the network |
| MenuMap showing results of |
| |
ON; OFF | Selects network initialization. |
| ON = network initializes as the |
| printer exits the menu. |
Sharp