Memory Menu
Item
RECEIVE BUFF SIZE
RESOURCE SAVE
FLASH
INITIALIZE
The default settings are bold.
Value | Description |
AUTO; 0.5 MB; 1 | Sets the size of the receive buffer |
MB; 2 MB; 4 MB; 8 | and depends on the amount of |
MB; 16 MB; 32 MB | memory installed in the printer. |
AUTO; OFF; 0.5 MB; | Set the size of the font cache area |
1 MB; 2 MB; 4 MB; 8 | and depends on the amount of |
MB; 16 MB; 32 MB | memory installed in the printer. |
EXECUTE | Initializes flash memory if installed. |
PS FLASH | 0% [n.n MB] TO 90% | Changes the size of the flash |
RESIZE | [n.n MB], in 10% | memory area. “n.n” indicates the |
| increments | actual size in MB. |
|
| Note: Special data is stored in the |
|
| Flash Memory, therefore you cannot |
|
| specify 100%. |
|
|
|
Sharp