Playback Functions

Partial Repeat Playback

(Repeat Playback of a

Specified Part)

1Press REPEAT during playback.

2Press c/d to select “SCENE SELECTION”, then press ENTER.

PLAY BACK TITLE

 

PLAY BACK CHAP

 

SCENE SELECTION

SET START POINT

3“SET START POINT” displays, press ENTER at the scene where you want.

• “SET END POINT” displays.

4Press ENTER at the scene where you want to set the end point.

•You can press VFWD to fast forward to the scene where you want to set the end point. When you reach the desired scene, simply press I PLAY and then ENTER to set the end point. To cancel Repeat Playback, press REPEAT-OFF.

NOTE

•Press LSKIP, the Repeat Playback is cancelled and the next chapter being played back.

•Press KSKIP once, the Repeat Playback is cancelled and the player returns to the start of current chapter (track).

•If you press KSKIP again (within about 5 seconds) the player will skip to the beginning of the previous chapter (track).

•For Partial Repeat Playback, set the start and end points within the same title.

•Repeat Playback may be forbidden depending on the disc.

•Partial Repeat Playback may not work in multi- angle scenes.

•If you press DISPLAY, you can confi rm the Repeat Playback status.

Switching Audio

You can change the audio output channel using

AUDIO.

Each time AUDIO is pressed, the audio channels change as follows:

BD VIDEO DVD VIDEO

The audio track currently being played back will be displayed.

 

BD-RE

 

BD-R

 

DVD-RW

 

DVD-R

 

 

 

 

 

VR MODE

 

 

When a recorded broadcast with a Secondary Audio Program is played back: Switches between “L”, “R” and “L+R”.

When a recorded broadcast with stereo or monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

NOTE

•When you play a program recorded in stereo or monaural, and if you are listening to the BITSTREAM sound via the digital output jack, you cannot select the audio channel. Set “AUDIO OUT” to “PCM” (page 35), or if you want to change the audio channel, listen via the analog output jacks.

Switching Subtitles

If subtitles are provided in multiple languages, you can switch between them.

Press SUBTITLE during playback.

•The display indicates the subtitle number currently being played back, and the subtitles appear. Each time SUBTITLE is pressed, the subtitles change.

•“– –” is displayed if a disc has no subtitles.

•You can also select “OFF”.

Playback Disc p

29