Sharp BD-HP20U SETTINGS, Settings q, HDMI VIDEO OUT, TV ASPECT RATIO, COMPONENT VIDEO OUT, AUDIO VIDEO SETTINGS

SETTINGS

AUDIO VIDEO SETTINGS
TV ASPECT RATIO
• If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the
connected TV changes, you will have to change the “TV ASPECT RATIO” setting.
• You can set the screen aspect ratio of the connected TV, and adjust the video output.
• Select “TV ASPECT RATIO” from “AUDIO VIDEO SETTINGS”.										WIDE 16:9
									WIDE 16:9: Select this
MENU [AUDIO VIDEO SETTINGS]			MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]							NORMAL 4:3
									when connecting to a
AUDIO VIDEO SETTINGS			TV ASPECT RATIO						TV with a 16:9 screen
SPEAKER SETTINGS			COMPONENT VIDEO OUT
			HDMI VIDEO OUT						aspect ratio.
QUICK START
			HDMI AUTO DETECTION
AUTO POWER OFF									NORMAL 4:3: Select
			AUDIO OUT
AQUOS LINK
			DYNAMIC RANGE CONTROL		16 : 9			4 : 3	this when connecting to
PLAYBACK SETTING
									a TV with a 4:3 screen
FRONT DISPLAY / LED
VERSION							WIDE	NORMAL	aspect ratio.
SOFTWARE UPDATE
SYSTEM RESET
										LETTER BOX,
	MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]
							<When selecting NORMAL 4:3>			PAN SCAN
	TV ASPECT RATIO
	COMPONENT VIDEO OUT					LETTER BOX: If you connect to a TV with a screen aspect
	HDMI VIDEO OUT					ratio of 4:3 and playback a DVD with 16:9 video, the
	HDMI AUTO DETECTION
						video will be played back with black bands at the top and
	AUDIO OUT
	DYNAMIC RANGE CONTROL					bottom while maintaining the 16:9 ratio.
						PAN SCAN: If you connect to a TV with a screen aspect
		LETTER BOX		PAN SCAN		ratio of 4:3 and playback a DVD with 16:9 video, the video
						will be played back with the left and right sides of the
						image cut off to display in 4:3 screen aspect ratio. (This
						function works if the disc is labelled for 4:3PS.)
COMPONENT VIDEO OUT
• This sets the resolution of the component video output.										1080i, 720p,
MENU [AUDIO VIDEO SETTINGS]			MENU [AUDIO VIDEO SETTINGS - COMPONENT VIDEO OUT]							480p, 480i
AUDIO VIDEO SETTINGS			TV ASPECT RATIO
SPEAKER SETTINGS			COMPONENT VIDEO OUT
QUICK START			HDMI VIDEO OUT
			HDMI AUTO DETECTION
AUTO POWER OFF
			AUDIO OUT
AQUOS LINK
			DYNAMIC RANGE CONTROL
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE							1080i	720p
SYSTEM RESET							480p	480i

•Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press “COMPONENT RESET” on the remote control for fi ve seconds. Component video out will be reset to 480i (factory preset value).

Caution: HDMI output and Component output can not be used at the same time.

HDMI VIDEO OUT

• This sets the resolution of the HDMI video output.

MENU [AUDIO VIDEO SETTINGS]	MENU [AUDIO VIDEO SETTINGS - HDMI VIDEO OUT]			AUTO,
AUDIO VIDEO SETTINGS	TV ASPECT RATIO			1080p, 1080i,
	COMPONENT VIDEO OUT			720p, 480p
SPEAKER SETTINGS
	HDMI VIDEO OUT
QUICK START
	HDMI AUTO DETECTION
AUTO POWER OFF
	AUDIO OUT
AQUOS LINK
	DYNAMIC RANGE CONTROL
PLAYBACK SETTING
		AUTO
FRONT DISPLAY / LED
VERSION		1080p
			1080i
SOFTWARE UPDATE		720p	480p
SYSTEM RESET

Caution: HDMI output and Component output can not be used at the same time.

NOTE

•When the BD player is connected to a 1080p 24Hz compatible TV and the HDMI VIDEO OUT is set to AUTO, 1080p 24Hz will automatically be displayed when compatible discs are played back.

Settings q

33