Sharp CD-BA1600 Continued, Disc Skip, Random, To cancel random play, Remote control operation

(Continued)

DISC SKIP

	DISC SKIP
CD	RANDOM

■Disc number selection

1 When stopped, press the DISC SKIP button.

2 Press the 0/R(0R) button.

●The next disc playback will begin, after which each following disc will be played sequentially.

Notes:

●When the DISC SKIP button is pressed during playback, playback will begin automatically from the next disc.

(It is not necessary to press the 0/R(0R) button.)

●When one of the disc number buttons ( 1- 3) is pressed during playback, playback of the selected disc will begin auto- matically. (It is not necessary to press the 0/R(0R) button.)

■APSS (Auto Program Search System)

APSS automatically locates the beginning of any track.

To listen again to the track being played:

Press the 5 button for less than 0.5 seconds during playback.

To move to the beginning of the next track:

Press the 4 button for less than 0.5 seconds during playback.

●To skip a number of tracks at one time, press the 5 or 4 button repeatedly until the desired track number is shown.

●To start playing at a desired track, press the 5 or 4 button while in the stop mode to select the track number, and then press the 0/R(0R) button.

Note:

●APSS can only search for music on a single disc.

■Random play

(Remote control operation)

The tracks on the disc(s) can be played in random order automatically.

1 Load a disc(s) and close the disc tray.

2 Press the RANDOM button to begin random play.

●"R" will appear.

Notes:

●When using random play, be sure to press the ■ (CD ■) button after you are through listening. Otherwise, the disc(s) will play continuously.

●In random play the unit will select and play tracks automatically. (You cannot select the order of the tracks.)

To cancel random play:

Press the 0/R(0R) button.

●"R" will go out.

■Cue and review

1 Load a disc and begin playback.

2 Hold down the 2 button for audible fast forward, and hold down the 3 button for audible fast reverse.

3 Normal playback will resume when the 3 or 2 button is released.

Notes:

●When the end of the disc is reached while cueing, "END" will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.)

Press the 3 button for fast reverse or press the ■ (CD ■) button to stop CD operation.

●If the beginning of the disc is reached while reviewing, the mode will automatically switch to normal playback at that point.

9