1
3
COOL MODE
Drainage nozzle
Stopcock
E-20
Install the exhaust hose (See Page16), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
with the stopcock.
1Press the MODE button to select COOL
mode.
COOL DEHUM FAN VENT
2Press the POWER button to start op-
eration.
The red OPERATION lamp on the unit will
light.
3Press the TEMPERATURE button to set
the desired temperature.
•The temperature can be set within the range
of 64°F to 86°F.
4Press the FAN button to set the de-
sired fan speed.
AUTO QUIET LOW HIGH
TO TURN OFF
Press the POWER button again.
The red OPERATION lamp on the unit will turn
off.
1
4
2
3
"CLOSE" position