COOL MODE
Drainage nozzle
"CLOSE" position
Stopcock
2
3
1
4
Install the exhaust hose (See Page14), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock.
1 Press the MODE button to select COOL mode.
COOL DEHUM FAN VENT
2 Press the POWER button to start op- eration.
•The red OPERATION lamp on the unit will light.
3 Press the TEMPERATURE button to set the desired temperature.
•The temperature can be set within the range of 64°F to 86°F.
4 Press the FAN button to set the desired fan speed.
AUTO |
| QUIET |
| LOW |
| HIGH |
|
|
|
|
|
|
|
TO TURN OFF
Press the POWER button again.
•The red OPERATION lamp on the unit will turn off.