Sharp DIGITAL CAMERA

sharpVISION™ Digital Camera

sharpVISION™ User Manual 5

1.1. Cleaning the sensor

IDT recommends that the sensor NOT be manipulated in any fashion. Clean the optical

surfaces with filtered, compressed air and glass cleaner or distilled water. Use a cotton swab

or lens paper. Do not use alcohol or other solvents as these may damage the optical coating

and cements.

1.2. Laser

Do not focus a laser beam on the sensor directly or by reflection, it can cause permanent

damage to the sensor. Any laser powerful enough to produce localized heating at the surface

of the sensor will cause damage, even if the camera power is off. Laser-damaged sensors

are NOT covered by the warranty.

1.3. Check cabling

Ensure that all cable connections are properly secured and that there is not excessive strain

on the cabling.