Sharp DV-HR300U Timer Recording with VCR Plus+ System

45
Timer Recording
Timer Recording with
VCR Plus+® System
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
The operation method is the same for both
HDD and DVD.
• The VCR Plus+® System allows you to
program your Recorder for timer recording
simply by inputting the PlusCode number.
• The PlusCode numbers are listed in most
newspapers, television guides, and local
CATV listings. Simply by inputting this
PlusCode number, you can program your
Recorder for timer recording, eliminating
the need to input program start time, stop
time, channel, date and other information
usually necessary for timer recording.
• Up to 32 timer programs can be stored.
(This includes Easy Recording Guide,
Favorite Program, Timer Dubbing, and
Timer Program.)
Preparation to Use VCR Plus+ System
1Check that the clock is displaying the
correct time.
2Preset the channels.
3When you record SAP broadcast, set
“SAP SETTING” to “ON” (see page 98).
4When recording from an external
equipment such as a CATV box or
satellite receiver, turn on the power of the
external equipment.
1 Press VCR PLUS+ (button) to
display the VCR Plus+ Setting
screen.
• If you press VCR PLUS+ (button)
when the clock has not been set, the
“CLOCK SETTING” screen will
appear.
2 Press Number buttons to enter
the PlusCode number.
VCR Plus+ system
PRESS NUM KEYS TO ENTER PlusCode No.
1 2 3 4 5 –– – –
82:0AMSAT 152/21
SET ERASE
• Press ERASE if you make a mistake
in the Plus Code number. Or Press \\
\\
\/
||
||
| to select “ERASE”, then press SET/
ENTER. Each time you press the
button, one digit will be erased.
• Press VCR PLUS+ (button) to cancel
the entire number.
3 Press \/| to select “SET”, then
press SET/ENTER.
• The timer recording details such as
date, start time, end time, channel
and the recording disc will be
displayed.
4
11
11
1Press \/| to select the
recording disc selection
column.
22
22
2Press '/" to select the
recording disc (“HDD” or
“DVD”), then press SET/
ENTER.
• You cannot select “DVD” to record
more than 6 hours.
• When recording a program on a
channel for the first time, be sure to
enter the correct channel number in
step 4 , otherwise the PlusCode
number will not be successfully
decoded.
• Press \\
\\
\/||
||
| to select the item you
want to correct such as the start/stop
time, then press ''
''
'/""
""
" to correct.
(For details refer to page 46.)
• If you complete timer recording
setting less than 3 minutes before it
starts, timer recording start time
column will stay as selected. Reset
the timer recording start time at least
3 minutes after the present time.
5
11
11
1Press \/| to select “REC.
MODE”, then press SET/
ENTER.
22
22
2Press '/" to select the
recording mode, then press
SET/ENTER.
• If there is not enough empty space
(time), a message is displayed.
Select the recording mode again.
When “MANUAL SETTING (MN)” is
selected:
• Select the recording mode with \\
\\
\/||
||
|, then
press SET/ENTER. (The recording mode
can be selected from 32 levels.)
6 Confirm the setting of timer
program, press \ to select
“COMPLETE”, then press SET/
ENTER.
• “TIMER PROGRAM LIST” screen is
displayed.
• The TIMER indicator on the front of
the Recorder lights up and timer
programming is completed.
• Select “ADVANCED” to input (or
change) the title name of program,
etc. (For details refer to page 51.)
TIMER PROGRAM
–
[SAT]
12/25 AIR/CATV4510 3011
::
82:0AMSAT 152/21
33 HDD
CH
AM AM
SET THE TIMER RECORDING DATE, TIME, CHANNEL AND MEDIA.
– – – TIMER PROG INFO – – –
Continued on Next Page |||