75

Recording from a Camcorder

(VCR) Using an Analog

Connection

VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
Material from a camcorder can be recorded with this
Recorder using an analog connection. You can capture
video by connecting a camcorder or VCR to the LINE IN 1,
2 or 3 jacks of this Recorder.
NOTE
• More vivid images can be viewed by connecting the S-
VIDEO IN jack on this Recorder with the S-video Out jack
on the camcorder using an S-video cable.
• Some camcorders may be required to be connected
using a special cable.
• Refer to the operation manual provided with the
camcorder for further information on the procedure for
connecting the camcorder.
• Material protected with a copy guard cannot be re-
corded. It may be impossible to get the correct video,
even if you just view without recording.
• Date and time as well as the contents of cassette memory
cannot be recorded with this Recorder.
• If you input video from an external device to this Re-
corder, there will be a slight difference in image quality
between the video viewed from the external device
directly on the TV, and video viewed as external input to
the Recorder.
Example:
To record by connecting a camcorder to the LINE IN 3
jacks.
RESET
S-VIDEOVIDEO L (MONO)-AUDIO-R
LINE IN 3
To VIDEO/AUDIO
Input jacks
To S-video
output jack To video/audio
output jack
To S-VIDEO
Input jack
Camcorder
The Recorder
Video/audio cable
(commercially available)
S-video cable
(provided with
camcorder or
commercially
available)
1
Select audio to be input from the external
equipment.
• Select audio using “EXTERNAL AUDIO” (page 76).
• Select “L CH” or “R CH” with “DUAL MONO REC.
SET” (page 76) to record in Video mode.
2
Press INPUT to set the connection to exter-
nal input channel (example: L3).
• The setting will cycle as follows each time you press
the button.
3
Play back the camcorder or VCR.
4
Press ●REC when you reach the scene you
want to start recording.
• The Recorder starts recording.
5
Press STILL/PAUSE when you want to
pause recording.
• Press STILL/PAUSE again to cancel Pause
mode.
6
Press ■STOP when you want to stop (end)
recording.

L1 (IN 1)

TV channels L3 (IN 3)

L2 (IN 2)

Recording from External Equipment