TAKING CARE OF THE PRODUCT
Clean of it over a newspaper etc. | (Continued) |
Dust cup (Taking care of each component.)
Clean it with the supplied cleaning brush.
(Mounted on the product)
After use, store it in the direction shown in the drawing.
NOTE
•Do not use chemicals, warm water, etc.
•After cleaning, leave it in the breezy shade until it becomes completely dry. Do not use a drier etc. at all.
(Using the dust cup before it becomes completely dry may create a smell or cause malfunctions.)
Filter cover
Wipe with cloth soaked in water or diluted neutral detergent.
Cover assembly
High efficiency air filter
Washing with water
• Remove the dust by tapping the filter on the floor with newspapers etc. spread out, and then wash with water.
Dry completely in the shade.
Measure of drying | • If it is not possible to remove | |
time: For a day. | ||
odor even after such efforts, | ||
| soak it in a solution of 10 mL | |
| of bleach diluted with a liter | |
| of water for about 3 hours, | |
| and rinse. |
Dust cup
Cup cover (Cylndrical filter)
Water or diluted neutral detergent
Cylindrical filter (Clean gently.)
Water or diluted neutral detergent
Dry it sufficiently after washing.
Turn it upside down and press the lever located on the bottom surface to open the bottom lid.
Dry completely in the shade.
Measure of drying time: For a day.
Screw fin
Shake it sufficiently to drain off the excess water.
Gear wheel
If it is hard to open the bottom lid, clean the section marked with • thoroughly to remove foreign objects.
10
12.5.82:58:23 PM
