Sharp EC-S2141, EC-S2142 Taking Care Of The Product, Dust cup Removing each component

Page 9 11

TAKING CARE OF THE PRODUCT

When the dust-disposal warning lamp(Red) and sound indicate

The filter is blocked up and the suction power has been reduced.

Take the following measures

Stop operation and disconnect the power plug.

Empty the dust cup, clean of the cylindrical filter and the high efficiency air filter.

peep, peep

Dust disposal

(Red:Blinking):

If you continue to use the product without cleaning, it will come to a stop automatically.

•Wait at least 2 minutes before restarting your cleaning operation.

(If you restart the cleaning operation within 2 minutes, the warning sound may beep.)

Clean of the dust cup set also in the following cases

•The suction power gets reduced.

•Operation noises are changed or increased.

•The unit's body gets hot.

•Foreign objects are tangled in the cylindrical filter.

•You are worryed about the dirtiness of the dust cup.

•The bottom lid of the dust cup is hard to open.

•The product has suctioned fine powder.

Dust cup (Removing each component)

Removing the filter cover.

Remove the cup 1 cover.

Shift the lock in the direction of release.

Removing the cup cover.

Turn the cup cover in the 2 direction of arrow,

Removing the high efficiency air filter.

• Do not try to grasp the grid element to remove the filter. (There is a risk of injuries.)

Remove it.

9

EC-S2142,S2141.indd 9

12.5.82:58:20 PM