Sharp EKJ-17WH manual Boil-Dry Protection, Cleaning And Maintenance

spout when boiling. Ensure that the lid is firmly in place before plugging into the power outlet.

ii.After pressing the open lid button, the lid will spring to the stated angle first, then you can lift open the lid to the maximum opening position. This

design uses less force and helps to reduce hot water dripping.

2.Position the kettle on the power base.

3.Connect the plug into a power outlet. Turn on the switch by pressing it, the indicator will light up. The kettle will start to boil the water and will switch off automatically once the water has boiled. You can shut off the power by turning off the switch at any moment during boiling water. If you

want to boil water again, only turn on the switch directly to restart the kettle.

NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the switch is constrained or if the lid is open.

4. Lift the kettle, using the handle from the power base and then pour the water.

NOTE: Always take care when pouring boiling water and avoid tipping the kettle too fast.

5. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base when not in use.

NOTE: Always disconnect the power supply when not in use.

BOIL-DRY PROTECTION

Should you accidentally operate the kettle without water; the boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to cool before filling with cold water before re-boiling.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet before cleaning.

1. Never immerse the kettle, power cord or power base in water or allow moisture to come into contact with these parts.

Page 4 of 5