Installation Guidelines

NOTE - ventilation

•The air purifier is designed to remove air-suspended dust, but not harmful gases (for example, car- bon monoxide contained in cigarette smoke).

•It is suggested to open the window a bit when you smoking in order to facilitate ventilation.

CAUTIONS CONCERNING OPERATION

•Do not block the air intake and/or air outlet.

•Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam.

•Do not sit on the main unit and do not lean on it, it may cause injury or malfunction.

•Always hold the handle on the back of the unit when moving it.

Holding the back panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

•Do not operate the unit without the HEPA filter.

•Do not wash and reuse the HEPA filter.

Not only does it not improve filter performance, but also may cause electrical shock or malfunction.

•Clean the exterior with a soft cloth only. Do not use volatile fluids and/or detergents. The unit surface may be damaged or cracked.

•Always operate the main unit in an upright position.

•Keep the main unit away from water.

•During the operation of the product, please place the unit at least 6.5ft.(2m) away from equipment utilizing electrical waves such as televisions, radios or wave clocks.

•Avoid locations where curtains, etc., come into contact with the intake or air outlet. Curtains, etc., may become dirty or a malfunction may occur.

•Avoid use in locations where the unit is exposed to condensation or rapid temperature changes. (Use under appropriate conditions between 41 - 95˚F (5 - 35˚C) in the room.)

(If it is unavoidable please allow unit to stand for 1 hour before switching on.)

•Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.

•Avoid use in locations where grease or oily smoke is generated (such as in a kitchen, etc.). The unit surface may crack or the sensor may malfunction as a result.

•Place the unit about 1-2 ft. (30 - 60cm) away from the wall in order to ensure proper airflow. The wall directly behind the air outlet may become dirty over time. When using the unit for an extended period of time in the same location, periodically clean the wall and protect the wall with a vinyl sheet, etc. to prevent the wall from becoming dirty.

ENGLISH

FILTER GUIDELINES

•Follow the instructions in this manual for correct care and maintenance of the HEPA filter. Use only HEPA filter designed for this product.

E-7

FP-A28C, FP-A28U specifications

The Sharp FP-A28U and FP-A28C air purifiers are exemplary models designed to enhance indoor air quality, equipped with advanced features and technologies that cater to both residential and commercial environments. These purifiers combine style with functionality, offering users an efficient air-cleaning solution that is silent yet powerful.

One of the defining features of the FP-A28U and FP-A28C is their highly effective HEPA filtration system. This system captures 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, smoke, and pet dander. This level of filtration is crucial for allergy sufferers and anyone looking to improve their indoor air quality.

In addition to HEPA filtration, these models incorporate Sharp’s exclusive Plasmacluster technology. This innovation involves the release of positive and negative ions into the air, which helps to neutralize airborne allergens, bacteria, and viruses. By creating a healthy balance of ions, Plasmacluster technology enhances the purification process and leaves a fresh, clean atmosphere.

The FP-A28U and FP-A28C also boast a multi-stage filtration system, which includes pre-filters and activated carbon filters. The pre-filter captures larger particles, therefore prolonging the life of the HEPA filter, while the activated carbon filter works to eliminate unpleasant odors and volatile organic compounds (VOCs) from the air.

User convenience is a priority with the FP-A28 models. They are designed with a sleek and modern aesthetic, making them suitable for any room decor. Moreover, the intelligent auto mode feature adjusts the purification level automatically based on the surrounding air quality. The built-in air quality indicator provides real-time feedback, allowing users to see how effectively the unit is working.

In terms of energy efficiency, the FP-A28U and FP-A28C are designed to operate quietly, making them ideal for night-time use or in spaces where noise is a concern. Their low power consumption ratings contribute not only to reduced energy bills but also to a smaller environmental footprint.

In summary, the Sharp FP-A28U and FP-A28C air purifiers stand out for their robust filtration capabilities, innovative Plasmacluster technology, multi-stage cleaning processes, and user-friendly features. They represent a commitment to enhancing indoor air quality, offering a breath of fresh air in today's pollutant-prone environments.

Sharp FP-A28C Installation Guidelines, Place on a stable surface with sufficient air circulation

Models: FP-A28C FP-A28U