CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically.

When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

Dust SensorMain UnitTrue HEPA Filter

Do not wash the True HEPA Filter.

Washing will not improve filter performance, and it may cause electric shock or malfunction.

Pre-FilterMAIN UNIT Care Cycle 1 month

To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean.

Wipe with a dry, soft cloth

For stubborn stains or dirt, use a soft cloth dampened with warm water.

Do not use volatile fluids

Benzene, paint thinner, polishing powder, etc., may damage the surface.

Do not use detergents

Detergent ingredients may damage the unit.

Keep the unit away from water

DUST SENSOR Care Cycle 2 months

The sensitivity of the sensor will become

 

unstable if the sensor is dirty or blocked.

Opening of dust sensor

Remove dust from the surfaces of the sen-

 

sor opening using a vacuum cleaner.

 

FILTER CLEANING Care Cycle 2 months

Clean the top surface of the Pre- Filter lightly with a vacuum cleaner.

When Pre- Filter is very dirty, wash it in water with mild kitchen detergent and dry it well in the shade.

After cleaning, press the MODE Selection Button for the

3 seconds with the power cord connected to the outlet. Pre-Filter A long beep will be heard and the operation hours will be

reset. Then the Filter Indicator Light will go out automatically,

E-10