Sharp FP-P35CX REMEDY, SYMPTOM, ERROR DISPLAY, LAMP INDICATION, REMEDY (not a malfunction), or odor, Light blinks, air is impure, The CLEAN-SIGNLight, The CLEAN-SIGNLight

TROUBLESHOOTING

Before calling for repair, please review the list below, since the problem may not be a unit malfunction.

SYMPTOM	REMEDY (not a malfunction)
Smoke is not removed	• Clean or replace the filters if they appear to be heavily soiled.
	(Refer to E-11)
The CLEAN-SIGN Light	• The air could be impure at the time the unit was plugged in.
illuminates green even when the
	(Refer to E-9)
air is impure
The CLEAN-SIGN Light	• The sensitivity of the sensor become unstable when the open-
	ing of the dust sensor is dirty or is clogged.
illuminates orange or red even	Clean the dust around the sensor opening using a vacuum
when the air is clean	cleaner. (Refer to E-10)
The discharged air has an aroma	• Check to see if the filters are heavily soiled.
or odor.	• Clean or replace the filters.
The unit does not operate when	• Is the unit installed in a location that is difficult for the sensor to
	detect cigarette smoke?
cigarette smoke is in the air.	• Is the Dust sensor opening blocked or clogged?
	(In this case, clean the opening.) (Refer to E-10)
The CLEAN FILTER Indicator	• After cleaning the pre-filter, press the MODE Selection Button
Light remains activated even	for 3 seconds to reset.
after replacing filter.	(Refer to E-9)

ERROR DISPLAY

LAMP INDICATION	REMEDY
The “Silent” Fan Speed Indicator	Fan motor disconnected or abnormal.
Light blinks.	Operation stops.
	• Pressing the POWER ON/OFF button will reset the error
	display, but if error occurs again, contact the shop where you
	purchased the unit.

E-12