Sharp FP-P40CX MAIN UNIT, ODOR SENSOR, PRE-FILTER, Main Unit, Pre-Filter, Odor Sensor, True HEPA Filter, Do not use detergents, Do not use volatile fluids

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically.

When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

Odor Sensor Main UnitTrue HEPA Filter

Do not wash the True HEPA Filter.

Washing will not improve filter performance, and it may even cause electric shock or malfunction.

Washable Active Carbon FilterPre-Filter

MAIN UNIT

To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to remain, they may become hard to clean.

Wipe with a dry, soft cloth

For stubborn stains or dirt, use a soft cloth dampened with warm water.

Do not use volatile fluids

Benzene, paint thinner, polishing powder, etc., may damage the surface.

Do not use detergents

Detergent ingredients may damage the unit.

Keep the unit away from water

ENGLISH FRANÇAIS ESPAÑOL

ODOR SENSOR

The sensitivity of the sensor will become unstable if the sensor is dirty or blocked. Remove dust from the surfaces of the sensor openings using a vacuum cleaner.

PRE-FILTER

As shown in the figure, clean the top surface of the Pre- Filter lightly with a vacuum cleaner.

When Pre- Filter is very dirty, wash it in water with mild kitchen detergent and dry Pre-Filter well in the shade.

Opening of odor sensor

Pre-Filter

E-15