Sharp FU-40SE Care And Maintenance, Main Unit, Filters, Odor Sensor Dust Sensor, E-12

CARE AND MAINTENANCE

(To maintain the best performance of this product, please clean the unit periodically.)

When cleaning, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands.

Electrical shock and/or bodily injury may occur as a result.

MAIN UNIT FILTERS

For soiling on the main unit and the installed surface, clean as early as possible. Stubborn dirt may be hard to remove.

Dry wipe with a soft cloth

For stubborn dirt, wipe with a soft cloth damp- ened with water or warm water of 40°C or less.

Do not use volatile fluids

Benzene, paint thinner, polishing powder, etc., may damage the unit surface.

Do not use detergents

Detergent ingredients may damage the unit surface.

Do not get wet

Never apply water on the unit.

ODOR SENSOR

DUST SENSOR

The sensitivity of the sensors will be come unstable if the odor or dust sensor is dirty or blocked.

Remove dust on the surfaces of the sensor openings using a vacuum cleaner.

Clean using the nozzle of a vacuum cleaner without removing the pre-filter.

NOTE

Never wash or clean the HEPA filter or stamina-power carbon by directly con- tacting the nozzle of a vacuum cleaner. This will greatly decrease the perform- ance of the filters.

Odor sensor Dust sensor

E-12