Precautions
General
●Please ensure that the equipment is positioned in a
4" (10 cm) 4" (10 cm) | 4" (10 cm) | ||||||||||||
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4" (10 cm)
●Use the unit on a firm, level surface free from vibration.
●Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
●Do not place anything on top of the system.
●Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to extremely low temperatures.
●If your system does not work properly, disconnect the AC power cord from the AC outlet and replug.
●In case of an electrical storm, unplug the unit for safety.
●Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires.
●The AC power plug is used as a disconnect device and shall always remain readily operable.
●Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
●This unit should only be used within the range of 41°F - 95°F (5°C - 35°C).
Warning:
The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
